PETROSCRAPS.COM

PTFE Round Rod, White, 1-1/2″ OD, 6″ Length Rod FormMax Temp 400 FVery Low Coefficient of FrictionExtremely Low Dielectric ConstantUV and Ozone Resistant PTFE (Polytetrafluoroethylene Teflon) has established itself as a tough, durable polymer, possessing a unique combination of electrical, chemical, mechanical and thermal properties unmatched by any other single substance. Maximum operating temperature 350 to 400F (176 to 204C). This material should not be heated to temperatures above 752F (400C). List Price: $ 17.41 Price: $…. Click Here to Read More

LDPE (Low Density Polyethylene) Round Rod, White, 1″ OD, 24″ Length High Impact StrengthLow working TemperatureExcellent Electrical InsulationLow Moisture Absorption Low Density Polyethylene (LDPE) is in the family of polyolefins. LDPE is a high impact strength extruded material that is corrosion resistant and exhibits low moisture permeability. It has a low working temperature, soft surface and low tensile strength. Some of the benefits of the material include its excellent electrical insulation properties, design versatility, low cost, low temperature formability, high coefficent of friction and it is virtually maintenace free. It is widely used in the chemical, petroleum, textile,…. Click Here to Read More

HDPE (High Density Polyethylene) Round Rod, White, 7/8″ OD, 36″ Length Abrasion ResistantLow coefficient of FrictionGood Energy AbsorptionResists Stress CrackingModerate Temperature Rating High Density Polyethylene (HDPE) is high impact strength with a higher temperature rating than Low Density Polyethylene. It has higher tensile strength, good energy absorption, abrasion resistance and resists stress cracking. HDPE has a low coefficient of friction and is self lubricating. Applications include low speed bearings, tank/chute/bin linings, packing rings in chemical applications. HDPE is in the family of polyolefin’s. List Price: $ 14.89 Price: $…. Click Here to Read More

HDPE (High Density Polyethylene) Round Rod, White, 1/2″ OD, 48″ Length Abrasion ResistantLow coefficient of FrictionGood Energy AbsorptionResists Stress CrackingModerate Temperature Rating High Density Polyethylene (HDPE) is high impact strength with a higher temperature rating than Low Density Polyethylene. It has higher tensile strength, good energy absorption, abrasion resistance and resists stress cracking. HDPE has a low coefficient of friction and is self lubricating. Applications include low speed bearings, tank/chute/bin linings, packing rings in chemical applications. HDPE is in the family of polyolefin’s. List Price: $ 10.23 Price: $…. Click Here to Read More

ABS Round Rod, Natural Beige, 1″ OD, 36″ L Good Chemical ResistanceHard SurfaceEasily MachinedGood for Vacuum FormingGood Impact Resistance General purpose grade ABS combines heat stability, chemical resistance and surface hardness of Acrylonitrile with the toughness and impact resistance of Butadiene and the rigidity and machineability of Styrene…to give you ABS with easy formability and high gloss. Good for vacuum forming, with a normal forming temperature at 295F (146C) – Rockwell Hardness R-105. Color: Natural (Beige). Other grades: flame retardant, high heat, low gloss, medium impact. List Price: $ 35.83 Price: $…. Click Here to Read More

CPVC Round Rod, Gray, 1/4″ OD, 48″ Length Good Tensile Strength and Impact StrengthTemperature Range 32 – 200FExcellent Chemical ResistanceLow Flame and Smoke GenerationHigher Temperature Rating than PVC CPVC (Chlorinated) Rod has higher heat resistance and better corrosion resistance than PVC. Its outstanding dielectric, flame and smoke properties provide parts with low flame spread and and smoke generation characteristics. Used extensively in chemical processing plants. Temperature range is 32 – 200 F List Price: $ 10.58 Price: $…. Click Here to Read More

Rulon J Round Rod, Gold, 1/4″ OD, 6″ Length Low Coefficient of FrictionUse for bearing surface on soft metalsLow moisture absorption, and excellent hydrolysis resistanceGood choice for inaccessible bearing surfacesNo lubrication required Rulon-J Rod is made from an all-polymeric, PTFE compound that offers low coefficient of friction (0.05 to 0.20 depending upon temperature and load), and a hardness of 60 on Shore D Scale with 0 percent water absorption. The material was expressly developed to run against soft materials such as Brass, Type 316 Stainless Steel, Aluminum, Zinc and plastics, and other materials which are worn rapidly by existing filled PTFE compounds. Check chemical…. Click Here to Read More

Acetal Round Rod, Black, 5/16″ OD, 24″ Length Excellent machinabilityExcellent Dimensional StabilityTough and Impact ResistantLow Coefficient of FrictionModerate Chemical Resistance Commonly referred to as Delrin, this Acetal is a useful replacement for metal in many applications such as gears, pulleys, impellers, etc. Easily machined with all standard machine tools. Its machinability is equal to or better than free machining brass in the normal operations of milling and turning to threading and tapping. This Acetal Resin offers a high degree of dimensional stability, toughness, impact strength, low coefficient of friction and fair chemical resistance.Note: Delrin may cause allergic…. Click Here to Read More

PVC Type 1 Round Rod, Gray, 5/8″ OD, 60″ Length Heat Resistant to 158 FMeets UlL 94Corrosion ResistantLight Structural DutyEasily Fabricated PVC profiles are corrosion resistant and heat resistant to 158F. These profiles are used for light structural duty in wet industrial environments, agricultural settings, and in the marine industry. Excellent corrosion resistance makes them an ideal material to use in plants handling various chemicals where metal can be replaced without sacrificing structural integrity. Solvent resistance is limited and not recommended for direct contact. UL 94, NSF 61 List Price: $ 11.71 Price: $…. Click Here to Read More

UHMW (Ultra High Molecular Weight) Polyethlylene Round Rod, White, 3/4″ OD, 24″ Length Low Coefficient of FrictionVery High Impact StrengthExcellent Abrasion ResistanceSelf LubricatingHighly Resistant to Corrosives Ultra high molecular weight polyethylene (UHMWPE), also known as high-modulus polyethylene (HMPE) or high-performance polyethylene (HPPE), is a thermoplastic. It has extremely long chains, with molecular weight numbering in the millions, usually between 2 and 6 million. The longer chain serves to transfer load more effectively to the polymer backbone by strengthening intermolecular interactions. This results in a very tough material, with the highest impact strength of any…. Click Here to Read More

Nylon Molybdenum Round Rod, 5/16″ OD, 36″ Length Molybdenum disulfide creates a superior bearing and bushingResists Common Solvents, Esters, Ketones, Alkali’s and Dilute AcidNo lubrication required7.5 to 8.5 percent water absorptionGood choice for inaccessible bearing surfaces This excellent combination of wearing resistant qualities of virgin Nylon 6/6 with the antifriction capability of molybdenum disulfide creates a superior bearing and bushing material. Useful wherever lubrication is undesirable, when the part is located in a position that is difficult to service. Nylon Molybdenum disulfide resists common solvents, hydrocarbons, esters, ketones, alkalies and dilute acids. Not…. Click Here to Read More

Rulon AR Round Rod, Maroon, 7/16″ OD, 12″ Length Reinforced PTFELoad BearingExcellent Chemical ResistanceExcellent Electrical InsulationBest Load Bearing and Flexibility of Rulon Family Rulon AR is the original reinforced PTFE Fluoropolymer (Similar to Teflon) for load bearing applications. It has the best combination of flexibility and load bearing capabilities and is recommended for seal applications. Rulon AR is a good electrical insulator and has excellent chemical resistance. List Price: $ 28.59 Price: $…. Click Here to Read More