• High Impact Resistance
• Temperature Range of -60 to 270 F
• High Rigidity
• Ductility of Softer Lower Modulus Plastics
• Transparent Clear

Commonly referred to as Lexan, Polycarbonate is a thermoplastic used in many applications that require high impact strength, a large temperature service range, excellent electrical properties, and dimensional stability. Polycarbonate Sheet is smooth and clear. Normal forming temperature of Polycarbonate is 375F (190C).

List Price: $ 13.91

Price: $ 13.91

• Chemical Resistance
• Zero Moisture Absorption
• Machines to tight tolerances
• continuous service to 425°F (220°C)
• Low friction
• Poor impact strength

PPS products offer dimensional stability and strength at moderate temperatures

List Price: $ 778.02

Price: $ 778.02

• Good Chemical Resistance
• Hard Surface
• Easily Machined
• Good for Vacuum Forming
• Good Impact Resistance

General purpose grade ABS combines heat stability, chemical resistance and surface hardness of Acrylonitrile with the toughness and impact resistance of Butadiene and the rigidity and machineability of Styrene…to give you ABS with easy formability and high gloss. Good for vacuum forming, with a normal forming temperature at 295 degrees F (146 degrees C) – Rockwell Hardness R-105. Color: Natural (Beige)

List Price: $ 44.93

Price: $ 44.93

• Chemical Resistance
• Zero Moisture Absorption
• Machines to tight tolerances
• continuous service to 425°F (220°C)
• Low friction
• Poor impact strength

PPS products offer dimensional stability and strength at moderate temperatures

List Price: $ 148.53

Price: $ 148.53

• Guaranteed to be full weight and thickness

Poly-cover plastic sheets

List Price: $ 54.49

Price: $ 44.62

• Sheet Form
• Max Temp 500 F
• Very Low Coefficient of Friction
• Extremely Low Dielectric Constant
• UV and Ozone Resistant

PTFE sheet (Polytetrafluoroethylene) sometimes known as Teflon has established itself as a tough, durable polymer, possessing a unique combination of electrical, chemical, mechanical and thermal properties unmatched by any other single substance. Maximum operating temperature -350 degrees to 500 degrees F. This material should not be heated to temperatures above 752 degrees F (400 degrees C). PTFE Sheet is available in a series of nine thicknesses from 0.005 inches to 0.500 inches. In addition, three of these thicknesses (0.015 inches, 0.030 inches and 0.060 inches) are also available in sheets which are etched on one side to make them bondable to other materials with most general purpose epoxies. Our stock sizes are cut from rolls and the material may be slightly curved, but it can easily be flattened by applying pressure to the whole surface.

List Price: $ 59.43

Price: $ 53.71

• Lightweight
• Chemical resistant

PVC is a Polyvinylchloride thermoplastic material with excellent chemical resistance and dielectric properties, good tensile, flexural and mechanical strength, low moisture absorption, exceptional dimensional stability and good flammability characteristics. PVC Perforated Sheets are ideal for strainers & drains, and may be used in acid resistant applications. Perforated PVC Sheets are ideally suited to many of the same applications as perforated metal; however, it is lighter and is more corrosive resistant.

List Price: $ 137.37

Price: $ 137.37

• Lightweight
• Chemical resistant

Plastic Polyethylene is ideally suited to many of the same applications as perforated metal. However, it is lighter and is more corrosive resistant.

List Price: $ 155.88

Price: $ 155.88

• Lightweight
• Chemical resistant

PVC is a Polyvinylchloride thermoplastic material with excellent chemical resistance and dielectric properties, good tensile, flexural and mechanical strength, low moisture absorption, exceptional dimensional stability and good flammability characteristics. PVC Perforated Sheets are ideal for strainers & drains, and may be used in acid resistant applications. Perforated PVC Sheets are ideally suited to many of the same applications as perforated metal; however, it is lighter and is more corrosive resistant.

List Price: $ 253.65

Price: $ 253.65

• Limited Cycles of Steam Sterilization
• Highly Resistant to Corrosive Materials
• Outstanding Chemical Resistance
• Continuous Temperature 180 – 200 F
• Low Cost

Polypropylene is in the family of polyolefins and offers a combination of outstanding physical, chemical, mechanical, thermal, and electrical properties not found in any other thermoplastic. Polypropylene is highly resistant to corrosive materials, and has high temperature resistance along with superior resistance to solvents, degreasers, as well as electrolytic attack. Common uses are battery cases, acid handling equipment, metal plating barrels, and fume hoods. It has lower impact resistance than polyethylene.

List Price: $ 31.77

Price: $ 31.77