PETROSCRAPS.COM

PTFE Sheet, White, 0.06″ Thick, 6″ Width, 6″ Length Sheet FormMax Temp 500 FVery Low Coefficient of FrictionExtremely Low Dielectric ConstantUV and Ozone Resistant PTFE sheet (Polytetrafluoroethylene) sometimes known as Teflon has established itself as a tough, durable polymer, possessing a unique combination of electrical, chemical, mechanical and thermal properties unmatched by any other single substance. Maximum operating temperature -350 degrees to 500 degrees F. This material should not be heated to temperatures above 752 degrees F (400 degrees C). PTFE Sheet is available in a series of nine thicknesses from 0.005 inches to 0.500 inches. In addition, three of these thicknesses…. Click Here to Read More

HDPE (High Density Polyethylene) Sheet, Beige, 0.06″ Thick, 12″ Width, 12″ Length Abrasion ResistantLow coefficient of FrictionGood Energy AbsorptionResists Stress CrackingModerate Temperature Rating High Density Polyethylene (HDPE) is high impact strength with a higher temperature rating than Low Density Polyethylene. It has higher tensile strength, good energy absorption, abrasion resistance and resists stress cracking. HDPE has a low coefficient of friction and is self lubricating. Applications include low speed bearings, tank/chute/bin linings, packing rings in chemical applications. HDPE is in the family of polyolefin’s. List Price: $ 9.87 Price: $…. Click Here to Read More

PTFE Sheet, White, 0.06″ Thick, 12″ Width, 12″ Length Sheet FormMax Temp 500 FVery Low Coefficient of FrictionExtremely Low Dielectric ConstantUV and Ozone Resistant PTFE sheet (Polytetrafluoroethylene) sometimes known as Teflon has established itself as a tough, durable polymer, possessing a unique combination of electrical, chemical, mechanical and thermal properties unmatched by any other single substance. Maximum operating temperature -350 degrees to 500 degrees F. This material should not be heated to temperatures above 752 degrees F (400 degrees C). PTFE Sheet is available in a series of nine thicknesses from 0.005 inches to 0.500 inches. In addition, three of these thicknesses…. Click Here to Read More

USP Class VIIs rated UL 94 VO and is generally accepted by the FAA for aircraft interiorsPEI has found use in the Medical Device Market because of its heat and radiation resistanceIt is prone to stress cracking in chlorinated solvents.It is soluble in partially halogenated solvents but resistant to alcohols, acids and hydrocarbon solvents. Product DescriptionPolyetherimide (PEI) is an amorphous, amber-to-transparent thermoplastic with similar characteristics to PEEK’s. Relative to PEEK, it is cheaper, but less temperature-resistant, and lower in impact strength. It is prone to stress cracking in chlorinated solvents. It is available under the tradename Ultem, a registered trademark of…. Click Here to Read More

High Impact StrengthLow working TemperatureExcellent Electrical InsulationLow Moisture Absorption Product DescriptionLow Density Polyethylene (LDPE) is in the family of polyolefins. LDPE is a high impact strength extruded material that is corrosion resistant and exhibits low moisture permeability. It has a low working temperature, soft surface and low tensile strength. Some of the benefits of the material include its excellent electrical insulation properties, design versatility, low cost, low temperature formability, high coefficent of friction and it is virtually maintenace free. It is widely used in the chemical, petroleum, textile, food and paper processing mills and in marine…. Click Here to Read More

Bondable Sheet FormMax Temp 500 FVery Low Coefficient of FrictionExtremely Low Dielectric ConstantUV and Ozone Resistant Product DescriptionBondable PTFE sheet is etched on one side. (Polytetrafluoroethylene) Sometimes known as Teflon, it has established itself as a tough, durable polymer, possessing a unique combination of electrical, chemical, mechanical and thermal properties unmatched by any other single substance. Maximum operating temperature -350 degrees to 500 degrees F . This material should not be heated to temperatures above 752 degrees F (400 degrees C). Thicknesses (0.015 inches, 0.030 inches and 0.060 inches) are available. Sheets are etched on one side to make them…. Click Here to Read More

Excellent forming propertiesThermoformableGood Impact Strength and RigidityEasily FabricatedGood Dimensional Stability Product DescriptionHigh Impact Styrene Sheet has excellent forming properties, good dimensional stability, impact strength and rigidity. It is one of the oldest and most cost effective thermoplastic sheets available. It is easily thermoformed into intricate shapes. It can be sawed, sheared, punched, vacuum formed and heat bent. Its low thermoforming temperature allows for short heating. Applications include models, displays, stamped…. Click Here to Read More

Excellent forming propertiesThermoformableGood Impact Strength and RigidityEasily FabricatedGood Dimensional Stability Product DescriptionHigh Impact Styrene Sheet has excellent forming properties, good dimensional stability, impact strength and rigidity. It is one of the oldest and most cost effective thermoplastic sheets available. It is easily thermoformed into intricate shapes. It can be sawed, sheared, punched, vacuum formed and heat bent. Its low thermoforming temperature allows for short heating. Applications include models, displays, stamped…. Click Here to Read More