• Monofilament Rod
• Max Temp 500 F
• Very Low Coefficient of Friction
• Extremely Low Dielectric Constant
• UV and Ozone Resistant

PTFE also known as Teflon has excellent chemical, thermal, and electrical stability. It retains a high percentage of its useful properties from cryogenic to elevated temperatures -348 F to 500 F and has a very low coefficent of friction. It has the lowest critical surface enrgy of all plastics, which makes it an excellent water and oil repellent for non-stick and mold release. PTFE has an extremely low dielectric constant and dissipation factor. Excellent resistance to UV, and Ozone. Typical applications include electronic bobbins, piping material for high temperature use, spring actuated seals, gaskets, packing and valve seats.

Price:

• High Impact Resistance
• Temperature Range of -60 to 270 F
• High Rigidity
• Ductility of Softer Lower Modulus Plastics
• Transparent Clear

Commonly referred to as Lexan, Polycarbonate is a thermoplastic used in many applications that require high impact strength, a large temperature service range, excellent electrical properties, and dimensional stability. Polycarbonate Sheet is smooth and clear. Normal forming temperature of Polycarbonate is 375F (190C).

List Price: $ 13.91

Price: $ 13.91

• High Impact Resistance
• Temperature Range of -60 to 270 F
• High Rigidity
• Ductility of Softer Lower Modulus Plastics
• Transparent Clear

Commonly referred to as Lexan, Polycarbonate is a thermoplastic used in many applications that require high impact strength, a large temperature service range, excellent electrical properties, and dimensional stability. Polycarbonate Sheet is smooth and clear. Normal forming temperature of Polycarbonate is 375F (190C).

List Price: $ 13.04

Price: $ 13.04

• Chemical Resistance
• Zero Moisture Absorption
• Machines to tight tolerances
• continuous service to 425°F (220°C)
• Low friction
• Poor impact strength

PPS products offer dimensional stability and strength at moderate temperatures

List Price: $ 778.02

Price: $ 778.02

• Abrasion Resistant
• Low coefficient of Friction
• Good Energy Absorption
• Resists Stress Cracking
• Moderate Temperature Rating

High Density Polyethylene (HDPE) is high impact strength with a higher temperature rating than Low Density Polyethylene. It has higher tensile strength, good energy absorption, abrasion resistance and resists stress cracking. HDPE has a low coefficient of friction and is self lubricating. Applications include low speed bearings, tank/chute/bin linings, packing rings in chemical applications. HDPE is in the family of polyolefin’s.

List Price: $ 34.24

Price: $ 34.24

• Good Chemical Resistance
• Hard Surface
• Easily Machined
• Good for Vacuum Forming
• Good Impact Resistance

General purpose grade ABS combines heat stability, chemical resistance and surface hardness of Acrylonitrile with the toughness and impact resistance of Butadiene and the rigidity and machineability of Styrene…to give you ABS with easy formability and high gloss. Good for vacuum forming, with a normal forming temperature at 295 degrees F (146 degrees C) – Rockwell Hardness R-105. Color: Natural (Beige)

List Price: $ 44.93

Price: $ 44.93

• Chemical Resistance
• Zero Moisture Absorption
• Machines to tight tolerances
• continuous service to 425°F (220°C)
• Low friction
• Poor impact strength

PPS products offer dimensional stability and strength at moderate temperatures

List Price: $ 148.53

Price: $ 148.53

• Molybdenum disulfide creates a superior bearing and bushing
• Resists Common Solvents, Esters, Ketones, Alkali’s and Dilute Acid
• No lubrication required
• 7.5 to 8.5 percent water absorption
• Good choice for inaccessible bearing surfaces

This excellent combination of wearing resistant qualities of virgin Nylon 6/6 with the antifriction capability of molybdenum disulfide creates a superior bearing and bushing material. Useful wherever lubrication is undesirable, when the part is located in a position that is difficult to service. Nylon Molybdenum disulfide resists common solvents, hydrocarbons, esters, ketones, alkalies and dilute acids. Not resistant to phenol, formic acid or concentrated mineral acids. Tested for moisture absorption using ASTM D-570 specifications: 1.2-2.5 percent when saturated over a 24-hour period; 7.5-8.5 percent maximum saturation.

List Price: $ 8.48

Price: $ 8.48

• Alkaline resistant, limited stability to solvents
• UV resistance – good
• Hydrolysis resistance – good

Precision woven monofilament mesh with uniform yarn sizes and spacing for consistent opening sizes. Nylon exhibits excellent recovery properties and resistance to deformation. Coefficient of friction is low and abrasion resistance is excellent, surpassing that of polyester. It is a tough, flexible and highly elastic fiber that resists most fuels and solvents.

List Price: $ 12.21

Price: $ 12.21

• Alkaline resistant, good resistance to most solvents
• UV resistance – good
• Hydrolysis resistance – good

Precision woven monofilament mesh with uniform yarn sizes and spacing for consistent opening sizes. Nylon exhibits excellent recovery properties and resistance to deformation. Coefficient of friction is low and abrasion resistance is excellent, surpassing that of polyester. It is a tough, flexible and highly elastic fiber that resists most fuels and solvents.

List Price: $ 2.83

Price: $ 2.83